SPC Performance

Upgrade or replace worn ball joints on SPC Performance Adjustable Upper Control Arms with these modern architecture, maintenance-free, adjustable units. Designed, engineered and assembled in...

Replace frozen or worn lower control arm bolts with SPC's replacement adjusters. Designed for the rigors of RAM heavy duty trucks, these high strength bolts come with a corrosion resistant coating...

For BMW E36, E46 and E85 bodied vehicles this tubular style arm is great when lowering this popular vehicle, or for correcting rear camber on stock vehicles. For high performance applications check...

Extends 39-60" for standard & compact cars. Spring loaded gauge easily adapts to a variey of tread widths in order to give fast, accurate toe readings. California Residents WARNINGInstallation...

Take the play out of front wheels during alignment! Place this spring-loaded pressure bar between the front tires to assure a more accurate alignment. Due to manufacturers recommendation to simulate...

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve...

These high strength forged rear arms are perfect for tuners or installers that need extended camber ranges on these popular platforms. Complete with O.E. stype bushings installed for a factory type...

Designed specifically for the S2000, this ball joint corrects camber on both the front and rear. An O.E. quality ball joint, this adjustable part corrects camber up to +/-1.5deg. NOTE: This ball...

SPC Performance offers whole car Performance Kits for solving camber problems when lowering some of today's most popular vehicles. These kits allow you to tune front and rear suspension angles as...

Replace corroded or damaged OE toe cam bolts on the rear of the 2000 to 2009 Subaru Legacy, Outback and many more with this SPC cam. Get up to +-1.5deg of toe change and then lock it in place with...

Easily adjust rear toe on Subaru Legacy, Baha and Outback models with this adjustable control arm from SPC. This arm provides +-1.0deg change with easy on-car turnbuckle style adjustment. The kit...

Fully adjust camber and toe on the rear suspension of your Subaru Outback, Legacy or Baja with this two arm kit from SPC. This kit offers a full +-2.5deg of camber and toe change so you can get back...