SPC Performance
SPC Performance JOUNCE BUMPER SPACERS (4) - 67300
(No reviews yet)
Write a Review
- SKU:
- SPC67300
- UPC:
- 082642673002
- MPN:
- 67300
- Availability:
- Regularly stocked product
Frequently bought together:
Description
Dial in your up-travel stops on your coil over suspensions. These easy to use Jounce Bumper Spacers allow you to control up-travel by simply placing urethane spacers between your factory bump stop and the shock body. The closed wedge design allows you to install the spacers without removing the spring or disassembling your strut. Take them out as easily as you put them in if you want to increase up travel. Each of the 4 spacers will decrease your up-travel by 8mm at the strut. California Residents WARNING
Installation Instructions
View AllClose
Installation Instructions
Related Products
Related Products
SPC Performance EZ Shim Spacer Kit (Set of 8) - 75970
SPC Performance
$28.01
This set (4 different sizes - 2 of each) aligns caliper to rotor after installation of a camber shim. Specifically designed to be used with the EZ Shim when correcting some FWD cars with hub mounted...
SPC Performance COIL SPRG STABILIZER (4) - 24900
SPC Performance
$23.29
Sometimes the front stabilizer may rub against the spring well housing. If this situation occurs, the stabilizer must be installed from the inside of the coil springs. Two sizes of short-nosed...
SPC Performance FORD CAM BOLTS (4) - 87500
SPC Performance
MSRP:
$58.93
$55.19
Drive up to +-2deg camber and caster change on the front of the Ranger, Explorer, Mountaineeer, and B-Series Pickup by replacing the stock bolt and locking plate with this cam bolt kit from SPC. The...
SPC Performance COIL SPRG STABILIZER (4) - 24640
SPC Performance
$23.16
Sometimes the front stabilizer may rub against the spring well housing. If this situation occurs, the stabilizer must be installed from the inside of the coil springs. Two sizes of short-nosed...