SPC Performance
SPC Performance CAM KNOCKOUT OUT PUNCH - 74910
(No reviews yet)
Write a Review
- SKU:
- SPC74910
- UPC:
- 082642749103
- MPN:
- 74910
- Availability:
- Regularly stocked product
Frequently bought together:
Description
A necessary tool for removing the alignment inserts on the upper control arm alignment brackets without damaging the bracket. Includes a center punch for the older GM vehicles and the newer Jeep JK's and an offset punch for GM's newer models. 74914-Replacement offset punch 74915-Replacement center punch California Residents WARNING
Installation Instructions
View AllClose
Installation Instructions
Additional Information
Clearance Item: |
N |
MPN: |
74910 |
Proposition 65: |
Y |
Case Lot Quantity: |
1 |
Category: |
Tools>Tools |
Related Products
Related Products
SPC Performance REAR CAM KIT - 86690
SPC Performance
$35.50
Quickly and easily adjust rear camber with this cam and bracket kit designed for the Ford Expedition. Simply replace the OE lock plate and dial camber in exactly where you need it. This kit features...
SPC Performance 14x16mm Slot Punch Tool - 74920
SPC Performance
MSRP:
$285.42
$226.06
Turn any 9/16" [14 mm] hole into a precise and clean 16mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into...
SPC Performance NISSAN CAM BOLT KIT - 87520
SPC Performance
MSRP:
$40.07
$39.48
These cams are designed to install in the lower control arms for camber & caster adjustment. They replace the original non-adjustable lower control arm bolts. California Residents...
SPC Performance JEEP CAM BOLT KIT - 82380
SPC Performance
MSRP:
$38.51
$38.29
These cams replace the front axle bolts to provide caster and pinion angle (up to 3 degree total change). California Residents WARNINGInstallation InstructionsThis Part Fits:YearMake
SPC Performance CAM EXTRACTOR PRESS TOOL - 40915
SPC Performance
MSRP:
$195.22
$157.46
Use this press tool to remove stuck OE cam sleeves from Toyota trucks. The extended length forcing screw allows you to remove the sleeve without removing the steering rack. Recommended when...