Injen 08-10 Ford F-250/F-350 6.4L Powerstroke Evolution Intake - EVO9005

The Evolution of cold air intakes is here. The Evolution cold air intake system by Injen Technology is the next generation of performance intake systems. The EVO9005 is specifically engineered for the 2008-2010 Ford Diesel Trucks with the 6.4L Powerstroke engine. Every EVO9005 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. They include stainless steel hardware and automotive grade urethane couplers. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS. , , The EVO9005 was precisely tuned and tested on our in-house dyno to replicate stock fueling while increasing horsepower and torque. The EVO9005 system features our 2-piece box design that incorporates our boost plenum, a massive 360? SuperNano-Web dry air filter, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25"deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9005 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can't be stopped?.. Roto-molded Housing and Boost Plenum; The EVO9005 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation. Engineered to work seamlessly with the factory ram air system. Roto-molded Intake Tube; The EVO9005 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. , ,

• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Durable Roto-Molded XLPE Polyethylene housing and intake tube
• Aggressive underHood appearance while maintaining an OE fit
• Dyno Proven gains of up to 23 hp and 53 lb-ft. of torque
• Stainless steel band clamps with inner protective liner
• Fully serviceable Injen SuperNano-Web dry air filter
• Reinforced automotive grade silicone couplers
• Replacement air filter part number X-1126-BB
• Designed to work with the stock calibration
• Stainless Steel Hardware/Clamps And Screws
• Aggressive intake growl under acceleration
• Injen Technology Limited Lifetime Warranty
• Optional hydroshield part number 1075BLK
• Made in Pomona, California USA

This Part Fits:

Year	Make	Model	Submodel
2009-2010	Ford	F-250 Super Duty	Cabela's
2008-2009	Ford	F-250 Super Duty	FX4
2008-2010	Ford	F-250 Super Duty	Harley-Davidson Edition
2008-2010	Ford	F-250 Super Duty	King Ranch
2008-2010	Ford	F-250 Super Duty	Lariat
2008-2010	Ford	F-250 Super Duty	XL
2008-2010	Ford	F-250 Super Duty	XLT
2009-2010	Ford	F-350 Super Duty	Cabela's
2008-2009	Ford	F-350 Super Duty	FX4
2008-2010	Ford	F-350 Super Duty	Harley-Davidson Edition
2008-2010	Ford	F-350 Super Duty	King Ranch
2008-2010	Ford	F-350 Super Duty	Lariat
2008-2010	Ford	F-350 Super Duty	XL
2008-2010	Ford	F-350 Super Duty	XLT