AEM
AEM Water / Methanol Inline Injection Filter - 30-3003
(No reviews yet)
Write a Review
- SKU:
- AEM30-3003
- UPC:
- 840879020941
- MPN:
- 30-3003
- Availability:
- Regularly stocked product
Frequently bought together:
Description
The AEM Water Injection Kit is a safe and economical way to reduce air inlet temperatures to increase boost pressure for more power. Lower air inlet temperatures allow users to advance timing without having to run higher-octane fuel. This is the most complete kit available on the market straight out of the box- no additional parts required.*STANDARD WATER INJECTION KIT* * Universal kit includes everything you need for installation * Progressive, controller-driven 150 PSI pump * One-gallon t
Warranty
Installation Instructions
View AllClose
Warranty
Installation Instructions
- -Installed on low pressure side of system (between tank and pump).
- -Protects the system from foreign particles.
- -Comes with 1/4" push lock fittings.
- -Filters up to 40 microns.
Additional Information
CARB: |
This product is not CARB Legal and not for sale in California |
Clearance Item: |
N |
MPN: |
30-3003 |
Proposition 65: |
Y |
Case Lot Quantity: |
1 |
Category: |
Forced Induction>Water Meth Components |
Universal Fitment: |
Y |
Related Products
Related Products
AEM Water/Methanol Injection Nylon Hose - 30-3314
AEM
$28.01
-Can be used to add more length to existing system.-Can be used to add more length to existing system.-Nylon hose, black.-20ft hose length-¼” Diameter
AEM V2 Water / Methanol 1.15 Gallon Methanol Injection Tank - 30-3325
AEM
MSRP:
$184.95
$164.80
The new controller designs feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash...
AEM Water/Methanol Injection 200psi Recirculation Pump - 30-3018
AEM
MSRP:
$250.95
$220.40
Water/Methanol Injection 200psi Recirculation Pump w/ 3/8 -inch NPT FittingsWarranty3/8 NPT Port for custom Hard/Braided LineFlows 1 Gallon per minuteDirectional flowup to 200 PSI
AEM V3 Water/Methanol Injection Kit - NO TANK (Internal Map) - 30-3302
AEM
MSRP:
$575.95
$494.18
Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful...
AEM V3 Water/Methanol Injection Kit - Multi Input (NO Tank) - 30-3352
AEM
MSRP:
$575.95
$494.18
Racers with high compression naturally aspirated engines or boosted engines who are looking for an alternative to boost-dependent water/methanol injection controllers have a solution in AEM's...